JVC KW-NT1 - Manual (Page 59)

57
ENGLISH
Settings for the disc playback
Initial: Underlined
Disc Setup items Selectable settings
Menu Language Select the initial disc menu language; Initial English (
☞ also page 72).
Audio Language Select the initial audio language; Initial English (
☞ also page 72).
Subtitle Language Select the initial subtitle language or erase the subtitle (Off); Initial English
(
☞ also page 72).
Video Output Format Select the colour system of the external monitor.
NTSC, PAL
• This setting is valid only to the external monitor connected.
Monitor Type
16:9 4:3LB
4:3PS
Select the monitor type to watch a wide screen picture on the external monitor.
16:9 : Select when the aspect ratio of the external monitor is 16:9.
4:3LB (Letterbox)/4:3PS (Pan Scan): Select when the aspect ratio of the
external monitor is 4:3.
• When you select <16:9> for a picture whose aspect ratio is 4:3, the picture
slightly changes due to the process for converting the picture width.
• Even if <4:3PS> is selected, the screen size may become <4:3LB> for some
discs.
D. Range Compres. You can enjoy a powerful sound at a low volume level while playing Dolby
Digital software.
Auto : Select to apply the effect to multi-channel encoded software.
On : Select to always use this function.
D. Audio Output Select the signal format emitted through the DIGITAL OUT (optical) terminal.
(
☞ also page 71)
Stream : Select this when connecting an amplifier or a decoder compatible
with Dolby Digital or MPEG Audio.
Dolby D : Select this when connecting an amplifier or a decoder compatible
with Dolby Digital.
PCM : Select this when connecting an amplifier or a decoder incompatible with
Dolby Digital or MPEG Audio, or when connecting to a recording device.
DivX Registration This unit has its own Registration Code. Once you have played back a file
with which the Registration Code recorded, this unit’s Registration Code is
overwritten for copyright protection.
EN_KW-NT1[E]3.indb 57 EN_KW-NT1[E]3.indb 57 09.5.29 1:14:58 PM 09.5.29 1:14:58 PM