JVC KW-AVX830 - Manual (Page 18)

18
ENGLISH
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “Now Reading” is shown on the screen.
• Do not start the car engine if a USB device is
connected.
• Stop playback before disconnecting a USB device.
• Electrostatic shock at connecting a USB device may
cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and the
USB device.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation or
cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, 58.
USB cable from the rear of
the unit
Playing a USB device
• This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/WAV files stored in USB mass storage class device.
• All tracks in the USB device will be played repeatedly until you change the source.
• Make sure all important data has been backed up to avoid losing the data.
* Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.
• You cannot connect a computer or portable HDD to the USB cable from the rear of the unit.
The source changes to “USB” and playback starts.
EN_KW-AVX830[E].indb 18 EN_KW-AVX830[E].indb 18 10.1.19 3:09:13 PM 10.1.19 3:09:13 PM