JVC KW-AVX830 - Manual (Page 51)

51
ENGLISH
Bluetooth device settings
Menu item Selectable setting/item Initial: Underlined
Dial Menu * 1 Select a calling method, then select the desired item to call. ( 48)
Message * 2 You can read a message from the following message histories.
♦ Unread
♦ Read
♦ Unsent
♦ Sent
: Messages you have not read.
: Messages you have read.
: Messages you have not sent.
: Messages you have sent.
• The number of messages in each history is also shown.
Open ( 45)
Search ( 45)
Special Device ( 46)
Connect ( 46)
Disconnect ( 46)
Delete Pairing ( 46)
Settings
Auto Connect * 3 When the unit is turned on, the connection is established automatically with...
♦ Off
♦ Last
♦ Order
: No Bluetooth device.
: The last connected Bluetooth device.
: The available registered Bluetooth device found first.
Auto Answer * 4 ♦ Off
♦ On
♦ Reject
: The unit does not answer the calls automatically. Answer the calls
manually.
: The unit answers the incoming calls automatically.
: The unit rejects all incoming calls.
Message Info * 4 ♦ Auto
♦ Manual
: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
: The unit does not inform you of the arrival of a message.
MIC Setting * 4 Adjust microphone volume connected to the Bluetooth adapter.
♦ 01/02/03
Version The Bluetooth software and hardware versions are shown.
* 1 Only for the device connected for “BT Phone.”
* 2 Selectable only when the source is “BT Phone” and the connected mobile phone is compatible with SMS (Short
Message Service).
* 3 Selectable only for “BT Phone.”
* 4 Only for the mobile phone connected for “BT Phone.” Not selectable when “NEW DEVICE” is selected.
Bluetooth
Bluetooth
Dial Menu
Message
Open
Search
Special Device
Connect
Device01
KW-AVX730
EN_KW-AVX830[E].indb 51 EN_KW-AVX830[E].indb 51 10.1.19 3:09:51 PM 10.1.19 3:09:51 PM