Sound, 34 english, Menu item selectable setting/item – JVC KW-AVX830 User Manual

Page 34

Advertising
background image

34

ENGLISH

Menu item

Selectable setting/item

Initial: Underlined

Fader/Balance

Fader/Balance

Reset

Fader 0
Balance 0

Back

Exit

Fader : Adjust the front and rear speaker output balance.

F6 to R6; Initial 0

• When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.

L6 to R6; Initial 0

Press [

5

/

/

2

/

3

] or drag [

] to adjust.

• To clear the adjustment, press [Reset].

Volume Adjust *

4

Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears if an FM broadcast is selected as the source.

–12 to +12; Initial 00

Subwoofer Level

Adjust the subwoofer output level.

00 to 08; Initial 08

High Pass Filter

Through

On

: Select when the subwoofer is not connected.
: Select when the subwoofer is connected.

Low Pass Filter

Select the crossover frequency between the front/rear speakers and the subwoofer.

55Hz, 85Hz, 120Hz

Amplifier Gain

You can change the maximum volume level of this unit.

Off

Low

High

: Deactivates the built-in amplifier.
: VOL 00 to 30 (Select this if the maximum power of the

speakers is less than 50 W.)

: VOL 00 to 50

• If you change the setting from <High> to <Low> while the volume level is set

higher than “VOL 30,” the unit automatically changes the volume level to “VOL
30.”

Loudness

You can activate/deactivate the loudness function.

Off

On

: Cancels.
: Boost low and high frequencies to produce a well-balanced

sound at a low volume level.

Rear Speaker *

5

You can activate/deactivate the rear speakers.
• This setting takes effect only when Dual Zone is activated. (

27)

Off

On

: Deactivate the rear speakers.
: Activate the rear speakers.

*

4

For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.

*

5

Only for KW-AVX830.

Sound

EN_KW-AVX830[E].indb 34

EN_KW-AVX830[E].indb 34

10.1.19 3:09:32 PM

10.1.19 3:09:32 PM

Advertising