JVC KW-AVX830 - Manual (Page 48)

48
ENGLISH
Receiving Message
Jack
Read?
Device Name
Yes No
To read a received message, operate the unit or the
mobile phone after stopping the car in a safe place.
• You cannot edit or send a message through the
unit.
Making a call
1
Display <Dial Menu>.
• You can also display <Dial Menu> by following
methods:
– Holding SRC on the monitor panel
– Pressing [Dial Menu] in the <Bluetooth>
menu ( 51)
2
Select a calling method, then select the
desired item to call.
Redial Shows the list of the phone
numbers you have dialed.
Received Calls Shows the list of the received
calls.
Phonebook Shows the phone book of the
connected mobile phone.
Missed Calls Shows the list of the missed
calls.
Phone Number Shows the phone number
entry screen.
Voice Dialing Available only when the
connected mobile phone has
the voice recognition system.
= Speak the name you want
to call.
Checking SMS reception
If the mobile phone is compatible with SMS (Short
Message Service), you can read the messages on the
screen.
When <Message Info> is set to <Auto>...
The unit rings and the following screen is displayed to
inform you of a message arrival. (
51)
To read the message, press [Yes].
The source is changed to “BT Phone.”
To read the message later, press [No].
• The message is stored into <Message>
=
<Unread>. ( 51)
When <Message Info> is set to <Manual>...
Access the message list to read messages. (
51)
EN_KW-AVX830[E].indb 48 EN_KW-AVX830[E].indb 48 10.1.19 3:09:48 PM 10.1.19 3:09:48 PM