Accu-Chek Advantage - Manual (Page 16)

29 28 Chapter 5: Maintenance and Troubleshooting Accu-Chek Customer Care 1-800-858-8072
Maintenance and Testing
Your meter needs little or no maintenance with normal use. It automatically
tests its own systems every time you turn it on and lets you know if
something is wrong. (See page 30 for error messages and what to do
about them.)
If you drop the meter or think it’s not giving accurate readings, make
sure that your test strips and control solution haven’t expired, then run
a control test.
To make sure the display is working properly, turn off the meter, then press
and hold down
(On/Off button) to see the complete display. All the
sections should be clear and look exactly like the picture to the left.
If not, call Accu-Chek Customer Care at 1-800-858-8072.
Cleaning Your Lancet Device
To clean the Accu-Chek Softclix Lancet Device, use a mild dishwashing liquid and a soft cloth. DO NOT
place the entire device under water. At least once a week, disinfect the cap after cleaning by placing it
in 70% alcohol (isopropyl) for 10 minutes. Allow the cap to air-dry after disinfecting.
Chapter 5: Maintenance and Troubleshooting
Cleaning Your Meter
Caring for your Accu-Chek Advantage Meter is easy – just keep it free of dust. But if you need to clean it,
following these guidelines carefully will help you get the best performance possible:
Do
• Make sure the meter is turned off.
• Gently wipe the meter’s surface with a soft cloth
slightly dampened with one of these cleaning
solutions:
• 70% alcohol
• Mild dishwashing liquid mixed with water
• 10% household bleach solution (1 part
bleach in 10 parts water) made the same day
Do Not
• Get any moisture in the code key slot or test
strip slot.
• Spray any cleaning solution directly onto the
meter.
• Put the meter under water (or any liquid).
• Pour liquid into the meter.
“Chapter 5: ...” is black on a blend
of process of PMS 328.
blend at top is process of PMS
328.
“Cleaning your ...” is process of
PMS 328.
illustrations are 4/C throughout.
blend in middle is 20% of process
of PMS 328 and throughout
chapter 5.
dotted rules are 20% Black
throughout.
all other text prints black.
blend at bottom is process of PMS
328 with :Chapter 5:...” reversed out
to white throughout chapter 5.
“Maintenance and ... ” and “Cleaning
your lancet...” are process of PMS
328.
all other text prints black.
362-17014 Silver Adv OB 3/27/03 6:00 PM Page 28