Installing the re-drive card – Accusys ExaSAN A08S-PS User Manual
Page 21
Chapter 4 – Installation
To reinsert the disk tray:
1. Keep the handle lifted as you
insert the disk tray back into the
empty slot.
2. Push the handle down to lock the
disk tray into place.
3. Close and lock the rear panel.
Installing the Re-drive card
The Re-drive card is compatible with PCI Express slots x4, x8, and x16.
Read the pre-installation notices earlier in this chapter
before proceeding.
1. Make sure the host server is
turned off.
2. Open the server case.
3. Remove the blanking plate from
the PCIe slot.
4. Position the connector of the card
over the PCIe slot.
5. Press the connector of the card
gently but firmly into the PCIe slot
until it is correctly and securely
seated.
6. Secure the metal bracket of the
card to the system case with a
screw.
21