Chapter 5 connections, Connecting to the host server, Connections – Accusys ExaSAN A08S-PS User Manual
Page 23: Chapter 5
Advertising
Chapter 5 – Connections
Chapter 5
Connections
This chapter provides instructions for making
connections and powering on your RAID system.
After you have installed the necessary components, your RAID system is
ready to be connected and powered on.
Connecting to the Host Server
z Insert one end of the external
PCIe x4 cable into the external
PCIe x4 port on the back of the
RAID system, and the other
end into the external PCIe x4
port of the Re-drive card.
Do
NOT remove the external PCIe x4 cable when in use
as this will cause data loss.
23
Advertising