Acroprint AcroComm - Manual (Page 11)

AcroComm Programming Manual
The transaction information can be displayed in the AcroComm window or saved as a
file. For example: DATA.DAT.
1.5. Source for Instructions
The source of instruction can be entered one command at a time via the keyboard or
from a text file. For example: PROGRAM.CLK.
1.6. Communications Setup
The communications setup allows for the standard comm port 1 through 4
communications and shared comm port through a network. Adjustable baud rate speed
can be set from 1200 to 19200 on RS232 and RS485 communications. Modem
communications can be set at 1200 and 2400 baud only. Terminal ID’s can be 1-9, A-Z,
a-z, …
Wait for Answer, xx seconds is used for modem connections and allows the pc modem
to connect to the Acroprint terminal modem.
Select all clock ID’s separated by a comma. Example: 1, 2, 4, A, Z
11