Acroprint AcroComm - Manual (Page 13)

AcroComm Programming Manual
1.9. Poll
When selecting poll, the program will send the TRANSMIT instruction to the Current
Selected Clock, the clock will transmit the transactions. The computer will read them
and send them to the specified destination in Transactions Destination.
1.10. Program
When selecting program, the program will read the instructions or configuration values
from the specified Instructions Source File, it will verify them and send them to the
currently selected Clock. If an Instructions Source File is not specified, the program
will request that it be keyed in. Either way, the instruction format must be followed. If
there is an instruction the program does not recognize, it will ignore it.
13