Introduction, Reference documents, Symbols and abbreviations – ACS ACR3801 Smart Card Reader User Manual

Page 4: Table 1 : symbols and abbreviations

Advertising
background image

ACR3801 – Reference Manual

[email protected]

Version 2.01

www.acs.com.hk

Page 4 of 62

1.0. Introduction

ACR3801 Smart Card Reader acts as a communication interface between a computer and a smart

card. Different types of smart cards have different commands and different communication protocols,

which prevents in most cases, the direct communication between a smart card and a computer. The

ACR3801 Smart Card Reader establishes a uniform interface from the computer to the smart card for

a wide variety of cards. By taking care of the card specifics, it liberates the computer software

programmer of getting involved with the technical details of the smart card operation, which are in

many cases irrelevant to the implementation of a smart card system.

1.1. Reference Documents

The following related documents are available from

www.usb.org

Universal Serial Bus Specification 2.0 (also referred to as the USB specification), April 27,

2000

Universal Serial Bus Common Class Specification 1.0, December 16, 1997

Universal Serial Bus Device Class: Smart Card CCID Specification for Integrated Circuit(s)

Cards Interface Devices, Revision 1.1, April 22, 2005

The following related documents can be ordered through

www.ansi.org

ISO/IEC 7816-1; Identification Cards – Integrated circuit(s) cards with contacts - Part 1:

Physical Characteristics

ISO/IEC 7816-2; Identification Cards – Integrated circuit(s) cards with contacts - Part 2:

Dimensions and Locations of the contacts

ISO/IEC 7816-3; Identification Cards – Integrated circuit(s) cards with contacts - Part 3:

Electronic signals and transmission protocols

1.2. Symbols and Abbreviations

Abbreviation Description

ATR

Answer-to-reset

CCID

Chip/Smart Card Interface Device

ICC

Integrated Circuit Cards

IFSC

Information Field Sized for ICC for protocol T=1

IFSD

Information Field Sized for CCID for protocol T=1

NAD

Node Address

PPS

Protocol and Parameters Selection

RFU

Reserved for future use*

TPDU

Transport Protocol Data Unit

USB

Universal Serial Bus

Table 1: Symbols and Abbreviations


*

Note: Must be set to zero unless stated differently.

Advertising