Activeforever Ironman IFT2000 Infrared Therapy Inversion Table - Manual (Page 11)

11
Step 3
Slide the bottom of the Pivot Arms (5) into the
brackets, located at each side of the Bed Frame (4),
align to the desired hole on the arm with the peg on
the bracket. Insert the peg into the hole to lock
the pivot arm in place. It is recommended that
you use the bottom hole on the pivot arm until you
become more familiar with the equipment.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Step 4
Install the Pivot Arm Rings (43) onto the Pivot
Arms (5). Mount the Bed Frame (4) to the Rear
U-Frame (2) by inserting the ends of the Pivot
Arms (5) into the channels on the plates. The
slotted portion of the rollers on the end of the
Pivot Arms (5) should be inserted into the
channels on the plates.
Hardware:
2 Pivot Arm Rings