Activeforever Ironman IFT2000 Infrared Therapy Inversion Table - Manual (Page 21)

21
OPERATION AND ADJUSTMENTS
For added safety, a nylon strap has been included to restrict the degree of inversion. This strap can
be adjusted to different lengths to allow for a greater or lesser degree of inversion. To lengthen the
Nylon Strap (32) feed the top end of Nylon Strap (32) into the strap lock, and pull on the lower end of
the strap. To shorten the length feed the bottom end of Nylon Strap (32) into the strap lock, and pull
on the top end.
ADJUSTING THE BOOM
The Adjustable Boom (3) can be moved to a variety of different positions, in order to accommodate
the height of the person on the inversion table. To adjust the Adjustable Boom (3) loosen the knob
(30), pull out the Ball Spring Knob (18), and slide the Adjustable Boom (3) up or down until the
desired height on the height scale is positioned just below the square bushing. When the
Adjustable Boom (3) is in the desired position, simply release the Ball Spring Knob (18), slide the
Adjustable Boom (3) slightly up or down until the Ball Spring Knob (18) locks into place, and tighten
the Knob (30).
THE STRAP
SHORTEN LENGTHEN