Activeforever Ironman IFT2000 Infrared Therapy Inversion Table - Manual (Page 12)

12
Step 5
Attach the top end of Handlebar (29) onto the
Rear U-Frame (2) and Pivot Arm Ring (43) with
one M8x23 Hex Head Bolt (38), one M8 Lock Nut
(15), and two Ø20xØ8.5x1.5 Washers (13).
Attach the bottom end of the Handlebar (29) onto
The Rear U-Frame (2) with one M8x38 Hex Head
Bolt (53), M8 Lock Nut (15), and two
Ø20xØ8.5x1.5 Washers (13). Tighten bolts and
nuts with two Wrenches provided.
Repeat above same steps to attach the other
Handlebar (29) onto the Rear U-Frame (2) and
Pivot Arm Ring (43).
Hardware:
1 Hex Head Bolt (M8x23) 2 Lock Nuts (M8)
4 Washers (Ø20xØ8.5x1.5) 1 Hex Head Bolt M8x38
Tool:
2 Wrenches M12x14