Activeforever Ironman IFT2000 Infrared Therapy Inversion Table - Manual (Page 16)

16
Step 9
Pull out the Ball Spring Knob (18), and slide the
Adjustable Boom (3) into the square bracket on
the bottom of the Bed Frame (4) as shown.
Slide the boom upward, until the desired height
on the Height Scale (41) is just below the bracket
on the bed frame. Lock the Adjustable Boom (3)
in place by releasing the Ball Spring Knob (18)
and sliding the Adjustable Boom (3) up or down
slightly until the Ball Spring Knob (18) "pops"
down into the locked position. For added safety,
secure the Knob (30) into the back side of the
bracket on the Bed Frame (4) as shown.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Step 10
Attach the Nylon Strap (32) to the Strap Lock (34) by inserting the end of the strap up through the
bottom of the strap lock, loop the Nylon Strap (32) over the Pre-assembled Loop Strap (33) and down
through the Strap Lock (34). Now, loop the strap back over itself, and insert back through the Strap
Lock (34), and pull tight to secure. See diagram.