Activeforever Aeroneb Go - Manual (Page 4)

3
16
IMPORTANT SAFEGUARDS (Cont.)
• Do not place or drop this product into water or any liquid
when it is plugged into a power source.
• Keep this product and cords away from heated surfaces.
WARNING:
• Be sure the device has been properly cleaned before each
use to avoid possible contamination.
• Clean the device after every use. Medication remaining in
the device will dry and reduce the efficiency of the device
resulting in longer times to dispense the medication. Failure
to clean device according to instructions may compromise
performance or result in device not working properly.
• Do not use rechargeable batteries.
• The green light flashing indicates a low battery. The Aeroneb
Go may not turn on properly, and stop working without
warning.
• If after proper cleaning, it takes longer than 15 minutes
to deliver 3mL of medication, the Nebulizer Unit should
be replaced.
• The user should ensure that exhaled medication is directed
away from bystanders.
• By connecting the AC/DC Adapter to the Aeroneb Go Control
Module, the Aeroneb Go Control Module and batteries are not
being charged.
• Keep power cord tidy so that it cannot become disconnected
and no one can trip over it.
• Do not nebulize alcohol-based drugs in an oxygen rich/high
pressure environment.
If this product is being used to treat a life threatening
condition, a backup device is necessary.
ELECTROMAGNETIC SUSCEPTIBILITY
This device meets the requirements of IEC 60601-1-2 which
describes requirements for electromagnetic compatibility (EMC)
of medical devices. This includes immunity to radio frequency
electric fields and electrostatic discharge, in addition to the other
applicable requirements of the standard. Compliance with EMC
standards does not mean a device has total immunity; certain
devices (cellular phones, pagers, etc.) can interrupt operation if
they are used near medical equipment.
SPECIFICATIONS
POWER SOURCES:
• Battery Powered Controller: 4.5 VDC (3 "AA" disposable batteries)
• AC Powered Controller: 100-240 VAC, 28-15 mA, 50-60 Hz
POWER CONSUMPTION:
• Less than 2 watts
APPROXIMATE WEIGHT:
• Aeroneb
® Go Nebulizer Unit: 60g (2 ounces)
• AC Powered Controller: 180g (6.5 ounces)
• Battery Powered Controller with batteries: 260g (9.3 ounces)
SOUND LEVEL:
• <35 dBA at 1 meter
APPROXIMATE DIMENSIONS:
• Aeroneb
® Go Nebulizer Unit (assembled):
40.0 x 105.0 x 93.0 mm (1.6” x 4.1” x 3.7”)
• AC Powered Controller: 51.0 x 46.0 x 87.0 mm (2.0” x 1.8” x 3.4”)
• Battery Powered Controller: 70.0 x 110.0 x 32.0 mm (2.8” x 4.3” x1.3”)
RECOMMENDED OPERATING ENVIRONMENT:
• Temperature range: 5°C to +45°C (+41°F to +113°F)
• Atmospheric pressure: Greater than 697 mBar
• Humidity: up to 95% relative humidity
RECOMMENDED TRANSPORT AND STORAGE ENVIRONMENT
• Temperature range: -20°C to +60°C (-4°F to +140°F)
• Atmospheric pressure: 450 to 1100 mBar
• Humidity: up to 95% relative humidity