Alpine TUE-T150DV - Manual (Page 10)

13-EN
• Signal Strength
In this menu you can see the signal strength
and signal quality for reference
to adjust your antenna position.
• About Box
shows you the hardware and current software version.
• Viewer’s Preference
Mark desired services as favourite to access them
by using the FAV+ (yellow) and FAV- (blue) buttons.
Mark desired services with the skip icon to skip
them when using the CH+ and CH- buttons.
Viewer’s Preference
Signal Strength
About Box
EN
• Parental Guidance
In this menu you can set the locking mechanism.
• Enter your password to access
the parental guidance level.
• Select the desired locking mechanism
according to the Australian OFLC codes.
(Effective only, if supported by the broadcaster.)
NO:
Block none
G: Block G and above
PG: Block PG and above
M: Block M and above
MA: Block MA and above
AV: Block AV and above
R: Block R and above
P: Block P and above
C: Block C and above
ALL: Block all
• Change Password
Select “Enabled” to change the parental password.
• Box Setting - Volume Mode:
- Select “Variable” to allow volume adjustment by
• Analog RCU - Extended RC Support:
-
-
remote control.
- Select “Fix” to fix the current volume output level
and block adjustment by remote control.
Select “Disabled” to support all standard RC
commands for TUE-T150DV.
Select “Enabled” to activate the extended
command support for analog TV RC commands.
STB Setup
12-EN