Alpine TUE-T150DV - Manual (Page 15)

16-EN
• Press the TXT key to view Teletext,
Teletext subtitle or DVB-subtitle.
This information is sent by the broadcaster
and is not permanently provided.
In Teletext mode the following controls are available:
- up/down buttons: Load the next/previous page.
- left/right buttons: Skip the next/previous 100 pages.
- Teletext color buttons (red, green, yellow, blue)
• The A/V button
The output source can be selected by pressing
the A/V button.
Sequence: … > TV > Radio > AUX1 > …
Hotkeys
16-EN
• Press the TXT key to view Teletext,
Teletext subtitle or DVB-subtitle.
This information is sent by the broadcaster
and is not permanently provided.
In Teletext mode the following controls are available:
- up/down buttons: Load the next/previous page.
- left/right buttons: Skip the next/previous 100 pages.
- Teletext color buttons (red, green, yellow, blue)
• The A/V button
The output source can be selected by pressing
the A/V button.
Sequence: … > TV > Radio > AUX1 > …
Hotkeys
EN
17-EN
• Automatic Search Function
The automatic search function will only search
for alternative frequencies of the service that was
received before reception was lost.
If the reception is lost the TUE-T150DV will automati-
cally carry out a quick search of all known service
frequencies. If this search is unsuccessful the TUE-
T150DV will request the user to choose whether to ac-
tivate the automatic search function or not. If the user
selects:
- “NO”: There is no function carried out
The tuner will wait for the reception to return.
This selection can be revised by pressing the OK button during a non-reception period.
- No input
The tuner will wait for the reception to return, but will automatically re-start the above quick-searchproce-
dure every time the reception is lost.
- “YES”: Automatic Search will be carried out.
The tuner will carry out a full search twice.
If available the tuner will automatically switch to the latest selected service on another carrier frequency.
If the full search is unsuccessful, the tuner will wait for the reception to return.
If the result is not satisfactory, please use the SCAN function of the remote control. In this mode,
the tuner will search for any available service.the tuner will search for any available service.