Binatone SGB-9903 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY MEASURES
Install the blender on a dry even and level
surface.
Before the appliance is plugged in, make sure
all blender components are properly installed.
When installing the blender jar do not apply
excessive force, as it may result in damage to
the appliance and termination of the warranty.
Do not use abrasive detergents for cleaning
the appliance.
If during operation you smell burning, hear strange noises, or
experience a drop in power immediately unplug the appliance
and clean the blender. If after that normal operation is not
resumed, contact the authorized service center.
In order to avoid damage to the blender when transporting it
to a different location, we recommend using the factory pack-
aging materials.
If the food is hot, then let it cool down prior to processing (the
maximum permissible temperature is 80°C).
DESCRIPTION OF THE
APPLIANCE
Figure A:
1. Housing
2. Operating mode selector
3. Blender jar
4. 4-blade shredder knife
5. Blender lid
6. Small blender lid / 60 ml measuring glass
BEFORE THE FIRST USE
Remove all packing materials from the appli-
ance.
Thoroughly wash the blender, especially the
parts intended to be in contact with food-
stuffs.
OPERATING INSTRUCTIONS
Food stuffs preparation for
shredding
1. Wash the products thoroughly.
2. Certain fruits and vegetables, like oranges,
tangerine, lemons, mango, kiwi, watermelons,
pineapples, etc. need to be peeled.