EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 14)

Issue 1.63.C Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
8
S
YSTEM
M
ENU
The System menu contains the commands described below:
Command Description
Video Configuration This opens the Epsio Configurator tool that allows
checking the video feeds.
You will find more information on the Epsio
Configurator in the section 2.2.4 ‘Checking the Video
Feeds’, on page 15.
Support > Keep for Study This command generates a ZIP file that contains
information. This is typically used by the support staff
to investigate a snap on which the detection would not
work. You need to be in the Epsio menu on the Remote
Panel for the ZIP file to be generated.
The generated ZIP file is stored in C:\EvsLogs\Epsio
and contains the following files:
• snapshot of the video signal when the user enter the
Epsio menu
• the XML files containing calibration information and
a parameter description of the snapshot
• the EPSIO.cfg file that contains the configuration
definition, and allows the support team to recreate
your configuration on the support setup.
Support > Update
Support Files
This command generates the EPSIO.cfg file that
contains the configuration definition, and allows the
support staff to investigate an issue with Epsio on
your setup by recreating your configuration on the
support setup.
The file is stored in C:\EvsLogs\Epsio.
Support > Update PCX3
Information
This command enables the users to test the video
board. Note that the test will generate disturbances on
the video for some seconds.
The Help > About window opens and displays the test
results. A popup will be displayed if the results do not
correspond to acceptable values.
Advanced > Setup
External Renderer
Advanced setup parameter. Please contact EVS for
more details.
Advanced > Reset 2CPU Advanced parameters only for support purposes, and
in coordination with the support team.