EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 65)

Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
Issue 1.63.C
59
2.6 DEFINING THE REPLAY SETTINGS
I
NTRODUCTION
The Replay settings are applied by default when you play back the offside line
animation once it has been created.
H
OW TO
M
ODIFY THE
R
EPLAY
S
ETTINGS
You can modify the Replay settings as follows:
1. From the main menu, press SHIFT+D (EPSIO) to enter the Epsio menu.
2. From the offside line mode, press SHIFT+MENU to display the Replay settings
screen:
Replay Settings p. 1.1
[F1] Pause Duration: 019 Frame(s)
[F2] Fade In Duration: 015 Frame(s)
[F3] Fade Out Duration: 015 Frame(s)
[F4] Preroll Duration: 02 Second(s)
[F5] Default playback speed : 100%
[F6] Clear All Events
[Menu] Quit [F0] Next
3. Select the function key related to the setting you want to modify.
4. Jog the wheel to set the requested value.
5. Press MENU to leave the Replay settings screen.
R
EPLAY
S
ETTINGS
The following table explains briefly the replay settings:
Setting Description
Pause Duration Duration of the pause before displaying the animation.
The pause duration can be between 0 and 300 frames. It
is recommended to have a minimum value of 3 frames.
Fade In Duration Duration of the fade effect at the beginning of the
animation.
The fade in duration can be between 0 and 300 frames.
Fade Out Duration Duration of the fade effect at the end of the animation.
The fade out duration can be between 0 and 300 frames.
Preroll Duration Number of seconds where the clip is paused before the