EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 64)

Issue 1.63.C Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
58
5. To edit one of the main parameters displayed on the left of the table, you can
directly edit the field values:
o
For a color selection, click the colored square and specify the RGB values.
o
For a slider, move the slider to the left or right to respectively decrease or
increase the parameter value.
o
For other fields, proceed as usual.
o
Click the Save button regularly to save your changes.
6. To edit one of the parameters displayed in the table, proceed in one of the
following ways:
o
To modify the value using a slider, click once the requested parameter.
This displays a slider below the table:
Move the slider to the requested value. The value is automatically modified in
the table. See also the note below.
o
To directly type the requested value in a field, double-click the requested
parameter:
This opens a dialog box similar to the following one:
Click in the field, type the requested parameter value and click OK.
7. Click the Save button to save the changes in the graphic suite.
Note on sliders
The displayed slider range corresponds to a portion of the full available
range, and depends on the selected value.
If the requested value is not available in the slider range, move to the
nearest value available, select another field, then select again the
requested field. The slider range will be adapted and will include the
requested value.