EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 72)

Issue 1.63.C Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
66
3.3 CREATING A LIVE ANIMATION
3.3.1 H
OW TO
A
CTIVATE A
L
IVE
T
OOL
To activate a live tool in the Epsio menu, you need to do the following:
1. Press MENU to enter the secondary menu.
2. Select the key corresponding to the requested live tool:
Offside Arrow Circle Graphics
ChromaK OSD
Graph <-- Calib Calib --> Detect
The secondary menu closes automatically.
The selected live tool is displayed on a black background, and the Detect
command is displayed in the main menu.
3.3.2 H
OW TO
C
REATE
A
N
A
RROW OR
C
IRCLE
A
NIMATION
When you are in the Epsio main menu, and have selected the live tool you want to
use, proceed as follows to create a live animation:
1. Looking at the operator’s PGM, press D (Detect) to refresh the automatic field
detection based on the live feed.
The virtual playfield is matched to the real playfield.
2. Position the mouse pointer where you want the arrow to start or the center of
the circle to be displayed.
The live animation is applied to the current timecode of the video material.
3. You can then perform one of the following actions:
o
Click again on the field with the mouse to reposition the animation.
o
Press Mark to remove the virtual playfield in red wireframe.
o
Press A (Graph) to hide the animation (if requested).
o
Press the TAKE key to toggle between the arrow and the circle animation.
3.3.3 U
SING THE
G
RAPHICS
T
OOL IN
E
PSIO
As soon as the Graphics live tool is activated in the secondary menu, the graphic
defined in the graphic suite will be displayed continuously as soon as the user
comes back to the Epsio main menu, and as long as the Graph command is active.