Manhattan 525480 150N Wireless Router - Manual - Manual (Page 18)

18
SYSTEM & NETWORK SETUP
2.3.5 Setup Procedure for L2TP xDSL
L2TP is another popular connection method for xDSL and other Internet connection
types, and all required setting items are the same as the PPTP connection (see
section 2.3.4 above).
2.3.6 Setup Procedure for Telstra BigPond
This procedure is only for the Telstra BigPond network service in Australia.
User Name — Enter the username assigned by Telstra.
Password — Enter the password assigned by Telstra.
Assign login server manually — Select to choose the login server by yourself.
Server IP Address — Enter the IP address of the login server.
When all settings are
finished (and after you
click “OK”), you’ll see
this message (right)
on your Web browser.
Click “Apply” to restart the
router. You’ll see a second
restart message (right).
Wait for about 30 seconds, then click “OK.” You’ll be forwarded to the router’s Web
management interface. The router is now running with the new settings, and, if all
information entered is correct, you can now access the Internet.