Manhattan 525480 150N Wireless Router - Manual - Manual (Page 49)

49
ADVANCED FUNCTIONS
address label of your device reads “aa-bb-cc-dd-ee-ff” or “aa:bb:cc:dd:ee:ff,” just
enter “aabbccddeeff” (without the quote marks).
Computer Name — With all the computers connected to the router listed in this
drop-down menu, you can select a name without checking its IP address.
Comment — Enter up to 16 alphanumerical characters to identify the MAC address,
such as “Room 2A Computer.” This is optional, and you can leave it blank.
Add — Click to add the MAC address and associated comment to the MAC address
filtering table.
Reset — Click to remove all entries (in either panel).
Current MAC Filtering Table — All existing MAC addresses in the filtering table.
Delete — You can select one or more MAC addresses to delete by checking the
“Select” box of those you want to delete, then clicking “Delete.”
Delete All — Click to delete all MAC addresses listed.
Enable IP Filtering — Check this box to enable IP address-based filtering, and
select “Deny” or “Allow” to determine the behavior of the IP filtering table. If you
select “Deny,” all IP addresses listed in the filtering table will be denied access
to the network; if you select “Allow,” only IP addresses listed in the filtering table
will be able to connect to the network; all other network devices will be rejected.
Add PC — Click to add a new IP address to the IP filtering table. Up to 20
addresses can be added. (Refer to section 3.3.1.1 Add PC below.)
Delete — You can select one or more IP addresses to delete by checking the “Select”
box of those you want to delete, then clicking “Delete.”
Delete All — Click to delete all IP addresses listed.