Manhattan 525480 150N Wireless Router - Manual - Manual (Page 47)

47
ADVANCED FUNCTIONS
Current Trigger-Port Table — All the settings for the specifal applications are listed
here.
Delete — To remove a Special Application setting from the Current Trigger-Port
Table, select the setting and click “Delete.”
Delete All — Click to delete all existing specifal application settings.
3.2.4 UPnP
This function enables network auto-configuration for peer-to-peer communications.
With this function, network devices will be able to communicate with other UPnP-
enabled devices directly and learn about other devices. Many network devices and
applications rely on UPnP function nowadays.
UPnP Module — There is nothing to configure for UPnP. Just select “Enable” or
“Disable.”
3.2.5 ALG
Application Layer Gateway (ALG) is a special function of this router. It includes
many preset routing rules for numerous applications (as shown below) that require
special support to work with the NAT architecture. Check “Enable” next to the
listing and click “Apply.”