Manhattan 525480 150N Wireless Router - Manual - Manual (Page 25)

25
SYSTEM & NETWORK SETUP
entered; otherwise, the Internet connection will fail even if the PPTP settings are
correct. Contact your ISP if you don’t know how you should fill in these fields.
The PPTP Settings panel presents these options:
User Name — Enter the username assigned by your ISP.
Password — Enter the password provided by your ISP.
PPTP Gateway — Enter the IP address of PPTP gateway assigned by your ISP.
Connection ID — Enter the connection ID. (optional)
MTU — Enter the MTU value of your network connection. NOTE: Use the default
value unless your ISP specifies otherwise.
Connection Type — Select one of the three connection types in the drop-down
menu (see PPPoE above):
Idle Time Out — Specify the time to shut down the Internet connection after no
Internet activity is detected. This option is only available when the connection
type is Connect on Demand.
NOTE: Enable BEZEQ-ISRAEL only if you’re using that network provider.
2.5.5 Setup Procedure for L2TP
L2TP settings are the same as the PPTP connection (see section 2.5.4 above).