SUUNTO E203 - Manual (Page 16)

13
6. PRESS the Center button to accept the choice and move to the next menu item.
Located in Field 1, the text "°C" or "°F" will begin to flash.
7. PRESS either the [+] button or the [-] button to toggle between "°C" or "°F" until the
desired unit of measure is displayed.
8. PRESS the Center button to accept the choice and move to the next menu item.
Located in Field 1, the text "m/h" or "ft/h" will begin to flash.
9. PRESS either the [+] button or the [-] button to toggle between "m/h" or "ft/h" until
the desired measure of ascent/descent rate is displayed.
10.PRESS the Center button to accept the choice and move to return to setting the
Time. Alternatively, PRESS and HOLD the Center button for 2 seconds to accept
all changes currently performed and return to the TIME mode.
Note: If no buttons are pushed within one minute after entering the setup, the device
automatically exits the setup mode and the values displayed at this time will remain at
the current settings.