SUUNTO E203 - Manual (Page 31)

28
4. When done, PRESS the Center button once to exit and return to the main [MEM]
mode.
Note: At any point during the viewing, you can exit the memory by pressing the Cen-
ter button once.
6.1.1. To view the Summarized History Information
Scrolling through these displays with the [+] button will exhibit the stored information
in the following order:
Display 1 shows the start date and time of history information: HIS (= history), BEG (=
beginning), time and date.
Display 2 shows the maximum pressure recorded since you last cleared the history
and the time and date/year of this measurement.
Display 3 shows the minimum pressure recorded since you last cleared the history
and the time and date/year of this measurement.
Display 4 shows the maximum temperature reading recorded since you last cleared
the history and the time and date/year of this measurement.
Display 5 shows the minimum temperature reading recorded since you last cleared
the history and the time and date/year of this measurement.
6.1.2. Viewing the Pressure and Temperature Information
Scrolling through these displays will show you the development of the barometric
pressure and temperature during the last 24 hours. The first display begins with
information of the most current situation and it moves toward the situation recorded
24 hours ago.
The information shown in these displays is temperature, sea level pressure, specific
time of the measurement and absolute pressure.