SUUNTO E203 - Manual (Page 22)

19
4. ALTIMETER MEMORY MODE [LOG]
The Altimeter memory mode provides you with:
• Stores altitude information for one event called a log.
• Stores altitude points entered into memory in the [ALTI] mode.
• Information stored in the log is: the start date and time, the altitude gain/loss, the
average ascent/descent rate, the max/min altitude, the cumulative altitude gain/
loss since clearing the memory (up to a year), the date when the memory was last
cleared and the altitude points entered into the memory in the Altimeter mode.
To view the Log mode:
If the triangle arrow is not pointing to LOG, PRESS the [+] or [-] button until the
triangle arrow is directly above LOG on the mode bar.
The display will show the following information:
• Field 1 shows average vertical ascent rate
• Field 2 shows total vertical ascent
• Field 3 shows average vertical descent rate
• Field 4 shows total vertical descent
While a logbook is being recorded, the mode indicator arrow flashes every 0.5
seconds.
Note: If the user does not press any button for 20 hours in the [LOG] mode, the unit
will exit this mode and return to the main TIME mode.
4.1. HOW TO START AND STOP A LOGBOOK
In the [LOG]-Mode:
1. PRESS the center button once. A text "StArt" appears in Field 4.