SUUNTO E203 - Manual (Page 24)

21
Display 1 shows the start date and time of logbook recording. The display will show
the text "LOG bEG".
Display 2 shows the maximum altitude recorded during the log and the time and date
when it was accomplished.
Display 3 shows the minimum altitude recorded during the log and the time and date
when it was accomplished.
Display 4 shows the start date and time of the history information. The history is the
accumulation of the vertical gain and loss from each recorded log. This can be used
to track vertical gain or loss over a long period of time. The start date of the history
begins when the history is cleared.
Display 5 shows the highest altitude reached so far during any logbook recording and
the time and date when reached.
Display 6 shows the total vertical ascent accumulated and the total vertical descent
accumulated since the history was cleared.
3. PRESS the Center button once to stop viewing the altimeter memory.
Note: The Altimeter Memory can be exited at any time by pressing the Center button
once to return to the main [LOG] mode.
4.3. CLEARING THE ALTIMETER MEMORY
There are two displays when in this mode: one is for clearing the altitude points
stored into the memory, and the other is for clearing the altitude history.
Note: When clearing the memory, the new start date for the history recording is the
clearing date.