SUUNTO E203 - Manual (Page 20)

17
5. PRESS either the [+] button or the [-] button to numerically scroll up or down until
the desired altitude is displayed.
6. PRESS the Center button to accept the choice and move to next menu Adjusting
the Resolution. Alternatively, PRESS and HOLD the Center button for 2 seconds to
accept any changes made and return to the [ALTI] main mode.
Note: Altitude Alarm is on and the alarm symbol visible only when you are using
Escape203 as Altimeter (not Weather Station).
3.1.4. Adjusting the Resolution
The screen displays "REs" and the value will begin to flash.
In the [ALTI] mode:
1. PRESS and HOLD the Center button in for 2 seconds.
2. Then PRESS the Center button (four times) until the text "RES" appears in Field 3
and. Located in Field 2, the resolution of the altitude reading begin to flash.
3. PRESS either the [+] button or the [-] button to toggle between 1 or 5 meters or 3 or
10 feet.
4. At the desired value, PRESS the Center button to accept the choice and return to
Setting the Reference Altitude. Alternatively, PRESS and HOLD the Center button
for 2 seconds to accept any changes made and return to the [ALTI] main mode.
3.2. ENTERING AN ALTITUDE POINT INTO MEMORY
In the Altimeter mode, double-PRESS the Center button to enter an altitude point into
memory. The device will show the stored information on the display for 3 seconds,
before returning to the main [ALTI] mode:
1. The altitude point number entered into memory in chronological order (e.g. P12 =
point number 12).