Spicer Drive Axles Application Guidelines - Manual (Page 66)

AXAG-0200 June 2009 66
60,000 lb. Housing Structural Ratings
Housing Dimensions (Standard Width)
Drive Axle Model
(Nominal GAWR
(See Note 1)
- 60,000 lb.)
Housing Box Section
(H x W x T)
Spindle Diameters
(Inner/Outer)
Spindle
Type
Standard Track Wide Track
D60-190P, D60-590P 5.91 x 5.31 x .63 5.91 x 5.31 x .63 4.125 / 3.500 W
Gross Axle Ratings Based on the Use of Wide Track Housings (lb.)
Housing Box Section (in.) 72.5 in. Maximum Track Width 76 in. Maximum Track Width Notes
5.91 x 5.31 x .63 60,000 58,000 2
Gross Axle Ratings Based on the Use of Outset Single Wheels (lb.)
Housing Box Section (in.) 78 in. Maximum Track Width 80 in. Maximum Track Width Notes
5.91 x 5.31 x .63 52,000 48,000 3
Gross Axle Rating Based on Site Travel Conditions Only (lb.) (See Note 4)
Housing Box Section (in.)
74 in.Track
(Standard)
78 in.Track
(Single Wheels)
80 in. Track
(Single Wheels)
Notes
5.91 x 5.31 x.63 68,000 64,000 62,000 3
Notes:
1. Nominal gross axle weight rating is based on minimum axle mounting centers of 35.88 in. and a
maximum track width of 74 in.
2. Track widths are nominal and may vary with wheel equipment.
3. All ratings are for standard track width housings. Track increase over standard is produced by wheel
outset .
4. Site Travel : 5 miles per hour maximum speed with liftable axles raised. This condition should not exceed
5% of the total operating miles of the vehicle.