TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide User Manual
Page 126
Advertising
Section 7
Using TROY Fonts
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
7-20
TROY OCR-B
(continued)
NOTE: This OCR font must be used at the designated point size to ensure optical readability.
Size I – must use 10-point size (upper and lower case characters can be used)
Size III – (not supported)
Size IV – must use 16-point size (upper and lower case characters can be used)
Advertising