TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 87)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-40
Verifying the
PCL 5
Connection
(cont.)
T O PRINT THE TROY CONFIGURATION PAGE :
NOTE: MICR Secure, MICR Secure EX, and IRD 9000 Secure EX series printers must
have the printer keylock switch set to “Print MICR” to enable printing of the TROY
Configuration page.
NOTE: TROY IRD 9000 1
UP series printers must have the 100-sheet multipurpose tray
installed to use standard-size forms for printing test and demonstration pages.
1. From the Main Window, click on
the printer you wish to manage.
2. Type in the current administrator
password in the password box at
the bottom of the Main Window.
If a password is not set, then
leave the password box blank.
3. From the Main Window, click on
File, Print, and then click on
Configuration Page. The printer
will automatically print the
TROY configuration page.