TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 71)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-24
Adjusting the
MICR Line
and/or Page
Image
Positioning
(cont.) T O ADJUST THE MICR LINE POSITIONING :
1. From the Main Window, click on Settings, and
then click on ExPT Offsets.
2. Enter the vertical and offset values for the MICR
line and/or image in the appropriate boxes.
These values are represented in decipoints
(1/720 of an inch). The valid offset range is –
720 to 720 (equals plus/minus one inch). If you
are using the automatic page rotation feature in
conjunction with the ExPT Offsets feature, then
you must adjust the image and MICR offsets
accordingly (see note on previous page).
3. After all values have been entered, click on
Update Printer to send the new settings to the
printer. All previous MICR line and image offset
values in the printer will be overwritten. The
system will prompt you with “Print Quality Document to verify adjustments?” Click on Yes to print the
quality document, or click on No to proceed without printing the quality document.
4. When closing the ExPT
Offsets window, the system
will prompt you with “Do
you want to save changes
to ExPT Offset values?”
Click on Yes to save the
new offset values in a user-
named file for future use
(e.g., Acme print job offset
values.ops), or click on No
to continue without saving
the new offset values.