Veris Technologies Precision Rate Controller - Operation Manual - Manual (Page 12)

Pub.# OM17-PRC
3-2
Figure 24 and 25.
When the tractor passes the second flag, press engage again. (Figure 26) The
display will show the error or difference between the traveled distance and the
distance calculated by the Controller. (Figure 27)
Figures 26 and 27.
If this is the first time the unit has been calibrated, this error can be large. Accept
the new speed calibration and re-run the course. Re-calibrate until the error is
within 5%. The cab console will give you the option each time you calibrate of
accepting the new settings, or keeping the previous settings. (Figure 28)
Figure 28