Veris Technologies Precision Rate Controller - Operation Manual - Manual (Page 15)

Pub.# OM17-PRC
5-1
Varying Rates with Pre-set Function
The Veris Precision Rate Controller allows you to pre-set three different rates,
and then change rates on-the-go by toggling from one rate to another rates with
the Up or Down arrow keys. To enter the three pre-set rates, press Function key
until Pre-set Menu screen appears: (Figure 30) Use Up-Down arrow keys to
toggle from manual mode to pre-set mode.
Figure 30
Press Function key to move to the next pre-set screen, and the Up-Down arrow
keys to set the pre-set rates. (Figure 31)
Figure 31.
When in Pre-Set mode, the main operating screen shows the pre-set rate
currently being applied. (Figure 32) Note: when you are in Pre-set mode, the Up-
Down arrow keys only toggle between pre-set rates.
Figure 32. Operating screen when using Pre-set Rates.