VEGA VEGAMET 513 - Manual (Page 22)

22 VEGAMET 513
Set the number 1500 (with keys [+],
[–] and [OK]) in this menu item. This
corresponds to the level at 0 % (if
you want to have a lower resolution of
the meas. value indication, you can also set
to 150 or 15).
Set the number 4500 (with keys [+],
[–] and [OK]) in this menu item. This
corresponds to the level at 100 %.
Adjust the decimal point as shown
(with keys [+], [–] and [OK]).
Choose the term "Height" in this
menu item (with keys [+], [–] and
[OK]).
Because you have chosen "Height" in
the previous menu item, you get a
choice of several units (mm, dm, cm,
m, yard…). Choose m (with the keys
[+], [–] and [OK]).
In the meas. value indication the
scaled value is shown. TAG -
No. 1
m
2,341
6.4 Scaling
Settings in the "reduced menu"
The adjustments under scaling determine
which number values and which unit will be
actually displayed in the measured value
indication (upper menu item). In the menu
items "0 % corresponds…" and "100 %
corresponds…" you can enter with [+] or [–]
and [OK] values which should be displayed
at 0 % and at 100 % filling. In the menu item
"Decimal point…" you determine the position
of the decimal point. In the next menu item
"prop. to…" you can select from a list of
parameters: percent, mass, volume,
pressure etc., by pushing [+] or [–] and
saving with [OK]. According to this
adjustment, the menu item "Unit…" provides
a new choice, e.g. m, dm, cm, mm, ft, yd and
in, if you have selected the parameter
"Height" (compare chapter "8 Measured
quantity and units").
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Adjust
ment Signal
condit
ioning
Sca-
ling Integr
ation
time s
0
Unit
– –
prop.
to
unde
fined
Deci-
mal-
point
888,8
100%
corres
ponds
1000
0%
corres
ponds
0
Meas. value
indication
Scaling example
You have a raised tank and you want the
level (relative to the reference level) to be
indicated in meters with three digits after the
decimal point.
0%
corres
ponds
1500
100%
corres
ponds
4500
Deci-
mal-
point
8,888
Percent
Pressure
Mass
prop.
to
High
Unit
m
dm
cm
….
100 %
0 %
h=1.5 m
h=4.5 m
2.341 m
Reference level