VEGA VEGABAR 65 Profibus PA - Manual (Page 39)

l Sensor address
l PIN
l Application
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
7)
Menu section Function Reset value
Basic settings Sensor address 126
Unit of measurement bar
Temperature unit °C
Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Damping 0 s
Linearisation Linear
Sensor-TAG Sensor
Display Displayed value PA-Out
Service Additional PA value Secondary Value 1
Out-Scale-Unit Volume/l
Scaling 0.00 to 100.0
Decimal point indication 8888.8
The values of the following menu items are not reset with "Reset:
Menu section Function Reset value
Basic settings Position correction no reset
Display Lighting no reset
Service Language no reset
Application no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
8)
7) Sensor-specific basic adjustment.
8) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
VEGABAR 65 • Profibus PA 39
6 Set up with the indicating and adjustment module PLICSCOM
28253
-
EN
-090522