VEGA VEGAFLEX 52P (Profibus PA) - Manual (Page 5)

VEGAFLEX 51P and 52P 5
Product description
- +
ESC
OK
Tank 1
m (d)
12.345
Pluggable adjustment module MINICOM
1.2 Application features
Applications
• Level measurement in solids.
• Measurement also in vacuum.
• All slightly conductive substances and all
products with a dielectric constant
e
r
> 1.7
can be measured.
• Measuring ranges
VEGAFLEX 51 0 … 10 m
VEGAFLEX 52 0 ... 20 m
Rugged
• High-resistance materials: PA, 1.4401.
Precise and reliable
• Resolution 1 mm.
• Unaffected by noise, steam, dust, gas
compositions and inert gas stratifications.
• Unaffected by varying density.
• Measurements under pressure up to
16 bar and at product temperatures up to
120°C.
Communicative
• Integrated measured value display.
• Optional display and adjustment module
separate from the sensor.
• Adjustment from the PLC level.
Approvals
• StEx Zone 10
• Ex Zone 0
1.3 Adjustment media
Adjustment with the adjustment module
MINICOM
With the 6-key adjustment module MINICOM
(3.2 cm x 6.7 cm) the adjustment can be
carried out in clear text dialogue. The adjust-
ment module can be plugged into the VE-
GAFLEX or into the external indicating
instrument VEGADIS 50. It also possible to
adjust VEGAFLEX from the external indicat-
ing instrument VEGADIS 50.
Adjustment with PC
The setup and adjustment of the VEGAFLEX
sensors can be done on the PC with the
adjustment program VVO (VEGA Visual Ope-
rating) under Windows
® .
The software leads quickly through adjust-
ment and parameter setting by means of
pictures, graphics and process
visualisations.
The adjustment program VVO from VEGA
makes the full range of functions of VEGA
sensors accessible and, if necessary, can
update the entire sensor software. For this
reason, the adjustment program must be
installed on a PC which is equipped with a
Profibus Master Class 2 interface card
(Softing) (see figure under "1.4 Profibus
output signal").