VEGA VEGAFLEX 52P (Profibus PA) - Manual (Page 9)

VEGAFLEX 51P and 52P 9
2
4
PA-Bus
- + ESC
OK
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
Product description
Adjustment with detachable adjustment module. The
adjustment module can be plugged into the sensor or
the external indicating instrument VEGADIS 50.
Detachable adjustment module MINICOM
- +
ESC
OK
Tank 1
m (d)
12.345
max. 25 m
Adjustment with adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module with display in the sensor,
the sensor-relevant adjustments can be car-
ried out directly on the sensor.
The adjustment module can be plugged into
the sensor or into the optional, external indi-
cating instrument.
The sensor can be adjusted with the adjust-
ment module MINICOM and basic functions
can be set. Beside the measuring conditions
and the simulation mode, the Profibus ad-
dress can also be adjusted and a false echo
storage can be carried out, see "4.2 Adjust-
ment with MINICOM".
Adjustment with the SIMATIC PDM ad-
justment program
For adjustment of all essential functions of the
VEGA sensor with the adjustment station
SIMATIC PDM from Siemens, a so-called
EDD is required. Without this EDD, only the
basic functions such as min./max. adjustment
or the integration time can be adjusted with
the PDM adjustment program. Further impor-
tant adjustment functions, such as input of
measuring environment data or false echo
storage, are not available without EDD. After
integration of the EDD files in the Simatic PDM
adjustment software, all important adjustment
functions are accessible. If it is not at hand,
the obligatory GSD (instrument master file)
as well as the EDD (Electronic Device De-
scription) necessary for PDM can be
downloaded from the VEGA-Homepage
(http://www.vega.com).