VEGA Capacitive electrodes EK … with signal conditioning instrument - Manual (Page 17)

Capacitive electrodes EK with signal conditioning instrument 17
Product description
1.6 Type plate
Before mounting and electrical connection
please check if you use the suitable instru-
ment. Therefore note the type plate which is
located as follows:
Type plate
The type plate contains important data re-
quired for mounting and connection. The
configuration and components of the type
plate are hence explained in the following
example.
1 Master data of the order no.
2 Ex-certification number
Explosion protection version - note the
information and regulations of the certificate
3 Data of the electronics / Approvals
4 No. of the order confirmation/Pos.-no.
5 Number of the electrode type
6 Serial number
7 Test mark when used as part of an overfill
protection for vessels storing water endan-
gering liquids - note the information and
regulations of the general type approval
8 Manufacturing year
9 Number of the test authority
Configuration of the type plate (example)
Order code
Detailed information on the order code you
will find in the "Product Information Capaciti-
ve“ or in the "VEGA-Pricelist“.
6
3
1
4
2
5
Z-65.13.XXX
7
VEGA ® EK 11
type EK11EXO.XGBVSTXXVKXX
see PTB no. EX-98.E.2085 EEx ia IIC T6 0032
PTB 98 ATEX 2086 II 1/2G EEx ia IIC T6
techn. data see document. / certificates 1998
protection: IP 66/67 Insp.
length: 400mm VVO: 02
Ord. no. 123456/000
® D-77757 Schiltach
8
9