VEGA VEGAWELL 72 4 … 20 mA - Manual (Page 14)

M ount VEGAWELL 72 with straining clamp as follows:
1 H
ang the straining clamp on a suitable wall hook
2 L ower VEGAWELL 72 to the requested height
3 S lide the clamping jaws upward and push the suspension
cable between them
4 H
old the suspension cable, push the clamping jaws
downward and fix them with a light blow
R
emoval is carried out in reverse order.
4 .3 Mounting steps with screwed connection
1
2
3
4
5
6
Fig. 4: Threaded fitting
1
Suspension cable
2 Seal screw
3 Cone bushing
4 Seal cone
5 Threaded fitting
6 Seal
M ount VEGAWELL 72 with screwed connection as follows:
1 W
eld the welded socket into the vessel top
2 L
ower VEGAWELL 72 to the requested height by means
on the welded socket G1½ A or 1½ NPT on the vessel side
3 I
nsert the suspension cable from below into the open
screwed connection
4 S lide the seal cone and the cone sleeve over the
suspension cable, fasten manually with the seal screw
14 VEGAWELL 72 • 4 … 20 mA
4 M ounting
27501
-EN
-080806