VEGA VEGAWELL 72 4 … 20 mA - Manual (Page 6)

D uring the entire duration of use, the user must make sure that
the occupational safety measures taken always comply with
current valid policy as well as new regulations.
2 .5 Safety approval markings and safety tips
T
he safety approval markings and safety tips on the device
must be observed.
2 .6 CE conformity
T he protection goals of the EMC Directive 2004/108/EC (EMC)
and the Low Voltage Directive 2006/95/EC (LVD) are fulfilled.
C
onformity has been judged according to the following
standards:
EMC: EN 61326: 2004
(
electrical instruments for control technology and laboratory
use - EMC requirements)
l
E
mission: Class A
l
S usceptibility: Industrial areas
LVD: EN 61010-1: 2001
(
safety regulations for electrical measurement, control and
laboratory instruments - part 1: General requirements)
2 .7 Fulfilling of NAMUR recommendations
W
ith respect to interference resistance and emitted interfer-
ence, the NAMUR recommendation NE 21 is fulfilled.
2 .8 Safety instructions for Ex areas
P
lease note the Ex-specific safety information for installation
and operation in Ex areas. These safety instructions are part of
the operating instructions manual and come with the Ex-
approved instruments.
2 .9 Environmental instructions
P
rotection of the environment is one of our most important
duties. That is why we have introduced an environment
management system with the goal of continuously improving
company environmental protection. The environment man-
agement system is certified according to DIN EN ISO 14001.
6 VEGAWELL 72 • 4 … 20 mA
2 F or your safety
27501
-EN
-080806