VEGA VEGASCAN 850 Profibus DP signal output - Manual (Page 17)

Profibus DP signal output VEGASCAN 850 17
Setup
6.3 Setup SIEMENS S5 with IM308C
In this case, the DP-Master is the communi-
cation processor IM308C from SIEMENS,
which can be plugged into the automation
instruments S5-115U, S5-135U and S5-155U.
The basic requirements for a successful
setup are an IM308C from version 2 and the
planning software COM PROFIBUS or COM
ET200 Windows from version 2.0. Only with
these or later versions does SIEMENS sup-
port consistent data over a greater length.
The complete sequence of the setup is de-
scribed in the PDF file "5OE2H.pdf“ or
"6E6A.pdf“ included on the utility diskette.