VEGA VEGASWING 51 - contactless electronic switch User Manual
Page 11
Advertising
1
2
Fig. 3: Horizontal installation
1
Switching point
2
Switching point (recommended mounting position, particularly for adhesive
products)
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your VEGASWING 51 additional protection against
moisture penetration by leading the connection cable downward in
front of the cable entry. Rain and condensation water can thus drain
off. This applies mainly to outdoor mounting as well as installation in
areas where high humidity is expected (e.g. through cleaning
processes) or on cooled or heated vessels.
Fig. 4: Measures against moisture penetration
Moisture
VEGASWING
51 • - contactless electronic switch
11
4 Mounting
30212
-
EN
-111006
Advertising