2 principle of operation, 3 operation – VEGA VEGASWING 51 - contactless electronic switch User Manual

Page 8

Advertising
background image

3

.2 Principle of operation

VEGASWING

51 is a point level sensor with tuning fork for level

detection.

It is designed for industrial use in all areas of process technology and
can be used in liquids.

Typical applications are overfill and dry run protection. With a tuning
fork of only 40 mm length, VEGASWING 51 can be also mounted e.g.
in pipelines from DN 32. The small tuning fork allows use in vessels,
tanks and pipes. Thanks to its simple and robust measuring system,
VEGASWING

51 is virtually unaffected by the chemical and physical

properties of the liquid.

It functions even under difficult conditions such as turbulence, air
bubbles, foam generation, buildup, strong external vibration or
changing products.

Fault monitoring
The electronics module of VEGASWING 51 continuously monitors via
frequency evaluation the following criteria:

l

Strong corrosion or damage on the tuning fork

l

Loss of vibration

l

Line break to the piezo drive

If a malfunction is detected or in case of power failure, the electronics
takes on a defined switching condition, i.e. the contactless electronic
switch opens (safe condition).

The tuning fork is piezoelectrically energised and vibrates at its
mechanical resonance frequency of approx. 1200 Hz. The piezos are
fixed mechanically and are hence not subject to temperature shock
limitations. The frequency changes when the tuning fork is covered by
the medium. This change is detected by the integrated electronics
module and converted into a switching command.

VEGASWING

51 is a compact instrument, i.e. it can be operated

without external evaluation system. The integrated electronics
evaluates the level signal and outputs a switching signal. With this
switching signal, a connected device can be operated directly (e.g. a
warning system, a PLC, a pump etc.).

The data for power supply are specified in chapter "Technical data".

3

.3 Operation

The switching status of VEGASWING 51 can be checked with closed
housing (signal lamp). Products with a density > 0.7 g/cm³ (0.025 lbs/
in³) can be detected.

Application area

Functional principle

Voltage supply

8

VEGASWING

51 • - contactless electronic switch

3 Product description

30212

-EN

-111006

Advertising