VEGA VEGAVIB 55 - two-wire User Manual
Page 14
Advertising
1
2
Fig. 5: Orientation of the tuning fork in case of flow
1
Marking with screwed version
2
Direction of flow
In case of horizontal mounting in adhesive products, the
surfaces of the tuning fork should be vertical in order to reduce
buildup on the blades. On the screwed version you will find a
marking on the hexagon. With this, you can check the position
of the tuning fork when screwing it in. When the hexagon
touches the seal, the thread can be still turned by approx. half
a turn. This is sufficient to reach the recommended installation
position.
1
Fig. 6: Horizontal installation - marking
1
Marking on top with screwed version
Adhesive products
14
VEGAVIB 55 - - two-wire
Mounting
29304
-EN
-070109
Advertising