VEGA VEGAVIB 55 - two-wire - Manual (Page 18)

6 Setup
6.1 In general
The numbers in brackets refer to the following illustrations.
On the electronics module you will find the following indicating
and adjustment elements:
l
DIL switch for mode adjustment - min./max. (1)
l
Signal lamp (4)
Note:
As a rule, always set the mode before starting the setup of
VEGAVIB 55. If the instrument is used in conjunction with a
signal conditioning instrument, always set the mode switch (1)
on VEGAVIB 55 to max. mode.
The mode is selected on the signal conditioning instrument
with the mode switch.
The switching output will change if you set one of the two mode
switches afterwards. This could possibly trigger other con-
nected instruments or devices.
Function/Configuration
18 VEGAVIB 55 - - two-wire
Setup
29304
-EN
-070109